Package Dimensions:
Length: 14.00 cm
Width: 11.00 cm
Height: 8.00 cm

Features

1、Energy Efficient: These solar motion sensor lights are powered by the sun, making them a cost effective and environmentally friendly lighting solution for your outdoor spaces. 2、Easy Installation: With a convenient clip on design, these lights can be easily attached to fences, gutters, or any other outdoor surface without the need for complicated wiring or tools. 3、Weather Resistant: The IP65 water resistant rating ensures that these lights can withstand all types of weather conditions, making them ideal for use in outdoor areas such as courtyards, garages, and camping sites. 4、2 Light Modes: MODE1 Constant Lighting Mode: It will auto turn on during the night time, and auto off during the day time, no motion sensor function. MODE 2 Dim to Bright Mode: It will auto turn on dim light at night. When motion is detected, it will turn on bright light and then back to dim light after people left. 5、Bright and Reliable: Featuring 40LEDs, these solar lights provide bright and reliable illumination for enhanced safety and security in your outdoor spaces.

Package List

2* Clip On Solar Motion Sensor Lights
1* Other Fittings

Package Dimensions:
Length: 25.00 cm
Width: 15.00 cm
Height: 9.00 cm

Specification

• Made of top quality military grade aluminum material, chrome polished which is anti corrosion and high temperature resistant, superior longevity.
• Prevent engine leaks by helping relive crankcase pressure while increasing horsepower.
• A more efficient way to fill and maintain the cooling system, and ensure any air in the system can escape.
• Plays an important roll in maintaining your engine and your car's performance, to ensure the the cooling system can operate as intended.
• Comes with pre-welded aluminum bracket and necessary mounting hardware for simple installation.
• Universal for most of car models.

Features

1、Made of top quality military grade aluminum material, chrome polished which is anti corrosion and high temperature resistant, superior longevity 2、Prevent engine leaks by helping relive crankcase pressure while increasing horsepower 3、A more efficient way to fill and maintain the cooling system, and ensure any air in the system can escape 4、Plays an important roll in maintaining your engine and your car's performance, to ensure the the cooling system can operate as intended 5、Comes with pre-welded aluminum bracket and necessary mounting hardware for simple installation. Universal for most of car models.

Package Dimensions:
Length: 31.00 cm
Width: 27.00 cm
Height: 9.00 cm

Features:

1. High strength 210D Oxford cloth designed for extra durability and all-weather protection, won't shrink or stretch.

6. Collapsible for easy storage, mooring and trailering.

Specifications:

Type: Boat Cover

Color: Blue

Package weight: 1358g

Unfolded Size: 510 x 230cm / 200.79" x 90.55"

Material Type: 210D oxford cloth

Special Features: Weather Proof, UV Protected, Water Resistant

Application: Fit boat up to 14'-16'(Length), 90''(Beam Width)

Package Included:

1 x Boat Cover

1 x Storage Bag

1 x Nylon Tighten Rope

Note:

1. Not for Cabin/Console Boats.

2. Please do not pull the strap too hard while using it to tie the cover up.

3. Please measure the length and beam (width) of your boat.

4. Beam width: measure the widest point of your boat

5. Center-line length: Do not measure up and over windshield.

Features

1、High strength 210D Oxford cloth designed for extra durability and all-weather protection, won't shrink or stretch. 2、PU coating technology for maximum water resistance and resistant to mildew and UV damage. 3、Adopt elasticated bottom hem to ensure a adjustable snug fit. 4、There are several plastic loops sewn around the entire bottom hem to fit the tie down rope. 5、Storage bag and Nylon tighten rope included. The rope is long enough to thread through all the loops.

Package Dimensions:
Length: 15.00 cm
Width: 15.00 cm
Height: 5.00 cm

Condition: 100% Brand New
Item Type: Rectifier
Material: Aluminum Alloy + ABS
Color: As picture shown
OEM: 5JW-81960-00 1D7-81960-00
Size: Approx. 91 x 93mm/3.7 x 3.6in
Fitment:
Mosfet Fit for Yamaha Raider / YZF R1 2002-2014 Fit for Yamaha FJR FJR1300 1300 de 2003 a 2005 5JW-81960-00
Fit for Yamaha FZ8 Fazer 800 from 2009 to 2011 1D7-81960-00
Fit for Yamaha FZ8 Fazer 800 from 2009 to 2011 1D7-81960-01
Fit for Yamaha FZ8 N 800 from 2009 to 2011 1D7-81960-01
Fit for Yamaha FZ8 N 800 from 2009 to 2011 1D7-81960-00
Fit for Yamaha FZ8 S 800 from 2009 to 2011 1D7-81960-00
Fit for Yamaha FZ8 S 800 from 2009 to 2011 1D7-81960-01
Fit for Yamaha MT 01 1700 2007 5YU-81960-00
Fit for Yamaha RS Nytro 900 from 2006 to 2007 5JW-81960-00
Fit for Yamaha RS Vector 900 from 2005 to 2009 5JW-81960-00
Fit for Yamaha RS Venture 900 from 2005 to 2013 5JW-81960-00
Fit for Yamaha RSG Rage 900 from 2005 to 2007 5JW-81960-00
Fit for Yamaha RX RX1 1000 from 2003 to 2005 5JW-81960-00
Fit for Yamaha RX Apex 1000 from 2006 to 2010 5JW-81960-00
Fit for Yamaha RX Warrior 1000 from 2004 to 2005 5JW-81960-00
Fit for Yamaha RXW Attak 1000 from 2006 to 2007 5JW-81960-00
Fit for Yamaha VK Professional 1000 from 2006 to 2013 5JW-81960-00
Fit for Yamaha XTZ Tenere 1200 from 2010 to 2012 1D7-81960-00
Fit for Yamaha XTZ Tenere 1200 from 2013 to 2017 1D7-81960-01
Fit for Yamaha XV Road Star Warrior 1700 from 2003 to 2009 5JW-81960-00
Fit for Yamaha XVS 950 from 2009 to 2011 1D7-81960-01
Fit for Yamaha XVS V Star 1300 from 2011 to 2013 27D-81960-00
Fit for Yamaha XVS V Star Tourer 950 from 2011 to 2013 27D-81960-00
Fit for Yamaha XVS V Star 950 from 2011 to 2013 27D-81960-00
Fit for Yamaha XVS Stryker 1300 from 2011 to 2013 27D-81960-00
Fit for Yamaha XVS V Star Tourer 1300 from 2011 to 2013 27D-81960-00
Fit for Yamaha XVS 950 from 2009 to 2011 1D7-81960-00
Fit for Yamaha YZF R1 1000 from 2002 to 2003 5JW-81960-00

Features

1、Premium aluminum alloy and ABS material, firm, corrosion resistant and durable. 2、Plug and play, easy installation, no complicated tools required. 3、Original standard, direct replacement for the old or broken rectifier. 4、Precise manufacturing, provides high reliability and high performance. 5、Practical accessory fit for Yamaha FJR FJR1300 1300 from 2003 to 2005.

Package List

Package Dimensions:
Length: 13.00 cm
Width: 9.00 cm
Height: 1.00 cm

Item Type: Car Turbo Gasket

Material: 304 Stainless Steel

Amount: 10Pcs

Installation Type: Direct Replacement

Fitment:

Replacement For Garrett T25 T28 Turbo

For Silvia 200SX S13 S14 SR20DET CA18 CA18DET

For GT-RS GT287IR all T2 flange series

Features

1、Durable Material: The turbo gasket is made of stainless steel material, high heat resistance, can withstand the pressure and friction in high temperature environment, and can resist the friction and wear caused by long term work. 2、Perfectly Sealed: The outlet gasket is closely fitted with the turbine interface and has good sealing performance to avoid gas leakage and ensure the normal operation of the engine. 3、Applicable Model: The outlet downpipe gasket is replacement for Garrett T25 T28 Turbo GT‑RS GT287IR all T2 flange series, for Silvia 200SX S13 S14 SR20DET CA18 CA18DET. 4、Easy to Install: The stainless steel turbo gasket has a simple installation, convenient and time saving, don't need too much tools or complicated steps. 5、Ideal Replacement: The turbine gasket is a perfect replacement for car repairing, can directly replace the old and broken accessory, ensuring the normal operation of your car.

Package List

10 x Car Turbo Gasket

Package Dimensions:
Length: 21.00 cm
Width: 18.00 cm
Height: 8.00 cm

Features

1、High Definition: 7in Color TFT LCD high definition monitor provides clear image from the backup camera view, more colorful, with 2 video inputs. 2、170° Wide Angle: 170 degree viewing angle can provide a better wide field of vision, waterproof and more safety when reversing. 3、Excellent Performance: Professional manufacturing, low power consumption, energy saving, prevent overheating, have a long service time. 4、Operating Voltage: The operating voltage of the display is 12V to 24v, which can be applied to cars, commercial vehicles, pickup trucks, trucks, buses, trailers, engineering vehicles, agricultural vehicles, electric vehicles. 5、Compatible: Perfectly compatible with the car's rearview camera, it can stop and reverse the car safely and correctly without relying on the side mirrors.

Package List

1 x Car Reversing Monitor

Package Dimensions:
Length: 28.00 cm
Width: 16.00 cm
Height: 14.00 cm

Features

1、With self‑priming function, this diaphragm pump can run dry for high reliability. 2、Low current, low power consumption, with intermittent working mode. 3、Has even running water flow and low noise during operation for better performance. 4、Can be used for the extraction of clean water, sewage and seawater (corrosive). 5、Also has pressure switch power‑off protection and bypass switch backflow protection, safer and reliable. 6、The installation position is compatible and can be replaced at will for much convenience.

Package List

Package Dimensions:
Length: 22.00 cm
Width: 12.00 cm
Height: 5.00 cm

Item Type: Motorcycle Front Pedal
Material: CNC 6061 Aluminum Alloy
Applicable Models:
Fit for T100 2016-2022

Fit for T120 2016-2022

Features

1、Applicable Model: Front foot peg is fit for T100 T120 2016 to 2022, please confirm whether your model is applicable before buying. 2、Enhanced Rider Comfort: Our motorcycle front foot pegs provide a comfortable and ergonomic position for riders, reducing fatigue during long rides. 3、Anti Slip Pattern: Our front pedals come with a unique non slip pattern that allows riders to better control and stabilize their motorcycles. 4、Sturdy and Fadeproof: Made of rugged, high strength aluminum alloy, foot peg has corrosion resistance and durability. After anodizing and spraying bright paint treatment, not easy to fade. 5、Installation Instructions: Install without modification, just remove the original pedal, and then install this pedal (does not contain pins/springs/steel balls and other accessories, please use the original parts).

Package List

1 x Pair of Front Foot Pegs

Package Dimensions:
Length: 38.00 cm
Width: 16.00 cm
Height: 4.00 cm

Item Type: Cylinder Head Cover

Material: Aluminum alloy

OE Number: 6H3 11191 00 1S

Fitment:

Replacement for Outboard Motor 2 stroke 60HP 3 cylinder series,6K5 6H3 models

Features

1、Applicable Models: Cylinder head cover is replacement for outboard motor 2 stroke 60HP 3 cylinder series,6K5 6H3 models. Please confirm whether your model is applicable before buying. 2、OE Number: The part number of reference is 6H3 11191 00 1S, please confirm whether it is consistent with the OE you need. 3、Stable Performance: Cylinder head cap cover is well manufactured which is excellent resistance to the marine environment and rust. 4、Premium Material: Engine cylinder head cover is made of high grade aluminum alloy, which is hardness, wear resistant, sturdy and durable and has a long service life. 5、Ideal Replacement: Direct replacement for old cylinder head covers, direct installation without modifications, making your outboard work again in no time

Package List

1 x Cylinder Head Cover

Package Dimensions:
Length: 26.00 cm
Width: 13.00 cm
Height: 7.00 cm

Item Type: Engine Oil Cooler
Material: Metal
Compatible: for Universal Motorcycle

Features

1、Better Riding Experience: This Oil Cooler with gold frame can quickly dissipate the engine oil, reduce engine wear and increase horsepower, and enhance the riding experience. 2、Excellent performance: Fast cool down the engine temperature, keep the engine within the normal operating temperature range and reduce the load of the engine to extend its useful life. 3、Cool Down Quickly: After the correct installation, the radiator will synchronize with the oil after starting the engine for 2‑5 minutes, and the oil temperature will decrease by 30‑40℃ . 4、Large Threaded Interface: The Oil Radiator with 12x1.25 threaded interface, the larger interface has a larger oil volume, which can far meet the oil flow rate. 5、Compatible: Comes with installation accessories for easy installation, great for the engine of dirt bike ATV four wheel motorcycle with potholes in the off road vehicle.

Package List

1 x Oil Cooler

1 x Mount

1 x Fixed Frame

4 x Screw

3 x Clamp

2 x Interface

10 x Gasket

6 x Nut

Package Dimensions:
Length: 30.00 cm
Width: 19.00 cm
Height: 14.00 cm

Item Type: Side View Mirror Cover
Material: ABS
Color: Carbon Fiber Look
Fitment:
Replacement for MK8 Standard 2021+
Replacement for MK8 2021+
Replacement for MK8 GTD 2021+
Replacement for MK8 R 2021+
Replacement for MK8 2021+
Replacement for Facelift MK8 All Models

Features

1、Ensure that you have the best appearance and matching degree, and ensure that the original parts are used in a 1:1 ratio on the original model. 2、Replacement installation method, no complicated steps required, will not take up much of your time. 3、Treated with a transparent coating to prevent discoloration caused by ultraviolet rays. 4、Can directly replace the broken or shabby one. Vehicle try‑in tests have been conducted to ensure trouble‑free performance. 5、Made with high‑quality materials of ABS, wear‑resistant, high‑temperature resistant, and have a long service life.

Package List

2 x Side View Mirror Cover

Package Dimensions:
Length: 0.00 cm
Width: 0.00 cm
Height: 0.00 cm

Specification

• Material: Carbon steel
• Suitable for:
• Citroen C5 1.8 / 2.0 HPi (02 - 05)
• Citroen Xsara 2.0 16V (02 - 05)
• Citroen Xsara Picasso 1.8 / 2.0 16 V (02 - 05)
• Peugeot 406 1.8 16V (00 - 04)
• Peugeot 807 2.0 16V (02 - 05)
• Material: Carbon steel
• Suitable for:
• Citroen C5 1.8 / 2.0 HPi (02 - 05)
• Citroen Xsara 2.0 16V (02 - 05)
• Citroen Xsara Picasso 1.8 / 2.0 16 V (02 - 05)
• Peugeot 406 1.8 16V (00 - 04)
• Peugeot 807 2.0 16V (02 - 05)

Package Dimensions:
Length: 30.00 cm
Width: 9.00 cm
Height: 5.00 cm

Item Type: Ball Joint Tie Rod
Material: Steel Alloy

Thread Size: Approx. 10mm/0.39in

Length: Approx. 150mm/5.91in

Fitment: Fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Four Wheelers Quad

Features

1、Wide Application: Tie rod assembly fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Four Wheelers Quad. Built to withstand the toughest driving conditions. 2、Ideal Solution: This ball joint tie rod can solve problems such as abnormal noise of the front suspension and excessive vibration of the front of the vehicle. 3、Durable Construction: Made of durable steel alloy material, uniform thickness, not easy to corrode, temperature resistance, high reliability. 4、Ideal Replacement: A replacement for the original ball tie rod. Give your vehicle better performance and body stability when you replace this ball tie rod. 5、Easy Installation: Thread size 10mm, length 150mm. It is designed according to the original car size and can be installed without special tools, which is convenient and fast.

Package List

2 x Ball Joint Tie Rod 

Package Dimensions:
Length: 13.00 cm
Width: 8.00 cm
Height: 2.00 cm

Item Type: Bluetooth AUX IN Adapter
Material: ABS
Length: Approx. 23cm/0.91in
Fitment:
Replacement for Opel Agila 2000-2007 CD 70 Navigation
Replacement for Opel Agila 2000-2007 CD30/CD30 MP3
Replacement for Opel Agila 2000-2007 CDC 40 Opera
Replacement for Opel Agila 2000-2007 DVD 90 Navigation
Replacement for Opel Antara From 2006 CD 70 Navigation
Replacement for Opel Antara From 2006 CD30/CD30 MP3
Replacement for Opel Antara From 2006 CDC 40 Opera
Replacement for Opel Antara From 2006 DVD 90 Navigation
Replacement for Opel Astra H (from 2004) CD 70 Navigation
Replacement for Opel Astra H (from 2004) CD30/CD30 MP3
Replacement for Opel Astra H (from 2004) CDC 40 Opera
Replacement for Opel Astra H (from 2004) DVD 90 Navigation
Replacement for Opel Combo 2003-2010 CD 70 Navigation
Replacement for Opel Combo 2003-2010 CD30/CD30 MP3
Replacement for Opel Combo 2003-2010 CDC 40 Opera
Replacement for Opel Combo 2003-2010 DVD 90 Navigation
Replacement for Opel Corsa 2003-2006 CD 70 Navigation
Replacement for Opel Corsa 2003-2006 CD30/CD30 MP3
Replacement for Opel Corsa 2003-2006 CDC 40 Opera
Replacement for Opel Corsa 2003-2006 DVD 90 Navigation
Replacement for Opel Corsa From 2006 DVD 90 Navigation
Replacement for Opel Corsa From 2006 CD30/CD30 MP3
Replacement for Opel Meriva From 2005 CD 70 Navigation
Replacement for Opel Meriva From 2005 CD30/CD30 MP3
Replacement for Opel Meriva From 2005 CDC 40 Opera
Replacement for Opel Meriva From 2005 DVD 90 Navigation
Replacement for Opel Movano from 08/ 2006 CD 70 Navigation
Replacement for Opel Movano from 08/ 2006 CD30/CD30 MP3
Replacement for Opel Movano from 08/ 2006 CDC 40 Opera
Replacement for Opel Movano from 08/ 2006 DVD 90 Navigation
Replacement for Opel Signum From 2003 CD 70 Navigation
Replacement for Opel Signum From 2003 CD30/CD30 MP3
Replacement for Opel Signum From 2003 CDC 40 Opera
Replacement for Opel Signum From 2003 DVD 90 Navigation
Replacement for Opel Tigra Twintop ( from 03/ 2005) CD 70 Navigation
Replacement for Opel Tigra Twintop ( from 03/ 2005) CD30/CD30 MP3
Replacement for Opel Tigra Twintop ( from 03/ 2005) CDC 40 Opera
Replacement for Opel Tigra Twintop ( from 03/ 2005) DVD 90 Navigation
Replacement for Opel Vectra C (from 2005) CD 70 Navigation
Replacement for Opel Vectra C (from 2005) CD30/CD30 MP3
Replacement for Opel Vectra C (from 2005) CDC 40 Opera
Replacement for Opel Vectra C (from 2005) DVD 90 Navigation
Replacement for Opel Vivaro from 08/ 2006 CD 70 Navigation
Replacement for Opel Vivaro from 08/ 2006 CD30/CD30 MP3
Replacement for Opel Vivaro from 08/ 2006 CDC 40 Opera
Replacement for Opel Vivaro from 08/ 2006 DVD 90 Navigation
Replacement for Opel Zafira from 7/ 2005 CD 70 Navigation
Replacement for Opel Zafira from 7/ 2005 CD30/CD30 MP3
Replacement for Opel Zafira from 7/ 2005 CDC 40 Opera
Replacement for Opel Zafira from 7/2005 DVD 90 Navigation

Features

1、Fitment: Replacement for Opel Agila 2000‑2007 CD 70 Navigation, replacement for Opel Combo 2003‑2010 DVD 90 Navigation, etc. 2、Characteristic: Support for bluetooth enabled devices, without the functional limitations of a car radio, you can connect to external audio sources. 3、High Compatibility: Adopting Bluetooth 5.0, backward compatible with other Bluetooth protocols, such as 2.0, 3.0, and 4.0. 4、Main Function: Match your phone or tablet to the Bluetooth module and you can use your phone to play music through the car speakers. 5、Easy Operation: Easy to install, just plug the plug into the socket on the back of the radio, plug and play, support select Aux from your radio.

Package List

1 x Bluetooth AUX IN Adapter

Package Dimensions:
Length: 24.00 cm
Width: 21.00 cm
Height: 11.00 cm

Condition: 100% Brand New
Item Type: Carburetor + Starter + Ignition Coil + Air Filter Kit
Material: Iron
Color: As picture shown
OEM:
Recoil Pull Starter: 28400-ZH8-023YA
Carburetor: 16100-ZH8-W61
Ignition Coil: 30500-ZE1-043
SPARK PLUG:17210-ZE1-517
Air Filter:17210-ZE1-822
On/Off Switch :36100-ZH7-003
Fuel Filter :6955-ZE1-000
Chrome fuel cap : 17620-ZH7-023
Fuel hose line:91424-Z4F-801
Fitment:
Fit for Honda 5HP 5.5HP 6.5HP Motor
Fit for Honda GX140 GX 140 GX160 GX 160 GX200 GX 200 GX168 GX 168 168F Engine
Fit for Honda WP20X WP30X WMP20X WMP20X1 WT20XK2 WT20XK3 WT20XK4 water pump
Fit for Lawn Mower, Propel Mower, Water Pump, Compressor, Power Washer etc
Fit for Pressure Washer,Go Kart, Modified Cars and same modified products
Fit for Harbor Freight Predator 212cc 6.5hp Go Kart OHV Engine R210 / 68121 69727 68120 69730
Fit for Honda EG1400 EZ1400XK1 EG2200X EG2500XK1 EZ2500 Generator
Fit for Baja Warrior Heat Mb165 Mb200 163cc 196cc 6.5HP Mini Bike
Fit for Honda WT20X Pumps HS522 HS55 HS521 Snow Blower

Features

1、Made of high quality material for maximum durability, it has long service life. 2、Easy installation, no need of complicated tools, convenient and fast. 3、Original standard, direct replacement for the old or broken one. 4、According to the original OEM specifications, perfectly fit. 5、Built to meet standard specification, strictly follow factory quality control.

Package List

Package Dimensions:
Length: 26.00 cm
Width: 13.00 cm
Height: 10.00 cm

Item Type: Mechanical Fuel Pump
Material: Aluminum + Chrome Plated
Free Flow: 115gph
Pressure: 6.5PSI
Inlet Attachment: Female
Inlet Size: Approx. 1/4in /0.635cm NPT
Outlet Attachment: Female
Outlet Size: Approx. 1/4in /0.635cm NPT
Gaskets: Included
Fitment:
Replacement for Pontiac 301 455 V8 engine 301 cu in 4.9 L
Replacement for Pontiac 301 455 V8 engine 455 cu in 7.5 L

Features

1、Replacement for Pontiac 301 455 V8 engine 301 cu in 4.9 L and 455 cu in 7.5 L to meet your needs. 2、Equipped with an adjustable and have been given heavy duty rubber seals for optimum leak protection. 3、Designed to flow at an improved rate over stock with 115 GPH free flow and 6.5 PSI, provide you more convenience. 4、The pumps are cast from lightweight aluminum and given a beautiful, high‑quality chrome finish. 5、Mechanical fuel pump is especially suitable for upgrading the fuel pump without losing that classic look.

Package List

1 x Mechanical Fuel Pump

1 x Gasket

Package Dimensions:
Length: 5.00 cm
Width: 5.00 cm
Height: 3.00 cm

Item Type: Window Switch Button
Material: ABS
Fitment:
Replacement for Mercedes Benz Class A 2013-2018
Replacement for Mercedes Benz Class B 2012-2019
Replacement for Mercedes Benz Class C 2008-2014
Replacement for Mercedes Benz Class E 2010-2015
Replacement for Mercedes Benz CLA 2013-2019
Replacement for Mercedes Benz GLK 2012-2015
Replacement for Mercedes Benz CLC 2010-2017
Replacement for Mercedes Benz ML 2012-2015
Replacement for Mercedes Benz GL 2013-2015
Replacement for Mercedes Benz GLE 2015-2019
Replacement for Mercedes Benz GLA 2013-2018

Features

1、Replacement for Mercedes Benz Class A 2013‑2018, replacement for Mercedes Benz Class B 2012‑2019, replacement for Mercedes Benz Class C 2008‑2014. 2、Molding is designed by original data, retaining original car groove and perfectly fit the groove. 3、Single layer design, no need to worry about cracks, and the light transmittance is as good as the original. 4、Inner circulation button is made of high quality ABS material, which is wear resistant and durable, with long use time. 5、The installation is simple, the replacement only takes 1 minute, and it will not damage your window lift switch button.

Package List

1 x Window Switch Button 

Package Dimensions:
Length: 12.00 cm
Width: 8.00 cm
Height: 4.00 cm

Item Type: Oil filler cap
Material: ABS
OEM: 06K103485A, 06K103485C

Fitment: Fit for CC 1.8L 2.0L Engines Only 2012‑2017

Features

1、Applicable Model: Oil filler cap is widely used in many kinds of cars and sedans, such as for CC 2012‑2017 (1.8L and 2.0L engines only). 2、Part Number: Manufactured according to strict original specifications, oil fill cap reference OEM numbers are 06K103485A, 06K103485C. 3、Good Sealing: Oil filler cover can seal well and help keep oil from leaking out of your engine oil filler opening, an important fuel tank accessory. 4、Direct Replacement: This engine oil filler cap is designed to match the fit and function of the original oil fill cap on specified vehicles. 5、Durable Material: The oil filling cap is made of hard ABS material, high strength, heat resistance, wear resistance, easy to clean and durable.

Package List

2 x Oil Filler Cap

Package Dimensions:
Length: 9.00 cm
Width: 8.00 cm
Height: 8.00 cm

Item Type: Air Conditioning Vent Grille
Material: ABS
OE: 8200212480, 687608041R, 687602444R, 687602618R, 8200817791, 687600649R
Fitment:
Replacement for Dacia Duster 2010-2017
Replacement for Dacia Logan MK1 2004-2011
Replacement for Dacia Logan MK2 2012-on
Replacement for Dacia Sandero MK1 2008-2011
Replacement for Dacia Sandero MK2 2012-on
Replacement for Duster 2010-2017
Replacement for Logan Sandero MK1 2004-2013
Replacement for Logan Sandero MK2 2014-on
Replacement for Master MK3 2010-on
Replacement for Vauxhall, Replacement for Opel Movano B 2010-on
Replacement for NV400 2010-on

Features

1、Fitment: Replacement for Dacia Duster 2010‑2017; Replacement for Dacia Logan MK1 2004‑2011; Replacement for Vauxhall, Replacement for Opel Movano B 2010 onwards. 2、OE Numbers: The replacing manufacturer part number for reference are 8200212480, 687608041R, 687602444R, 687602618R, 8200817791, 687600649R. 3、Improved Ventilation: This dash vent cover ensures even and smooth airflow from the air conditioning outlets, enhancing the air circulation and improving the air quality for a more comfortable driving experience. 4、Exquisite Design: The dash board air vent grille boasts an exquisite and stylish design that perfectly integrates with the interior of vehicles, enhancing the overall ambience. 5、Durable Material: The interior dash air vent cover is made of high toughness ABS materials that are durable, resistant to cracking and damage, providing a longer lifespan.

Package List

1 x Air Conditioning Vent Grille

Package Dimensions:
Length: 35.00 cm
Width: 12.00 cm
Height: 5.00 cm

Features

1、Designed for lower hinge door hinge pins, no drilling required. 2、Sturdy and refined appearance, powder coating, polished surface, rust proof. 3、The hollow design of the anti-slip strip prevents the foot from slipping off easily, especially in muddy and humid environments. 4、It is like a mini ladder that helps you get things on the roof and easily reach the roof. 5、Rugged and durable, it can be folded up after use, easy to carry.

Package List

1 x Hinge Foot Rest

Package Dimensions:
Length: 10.00 cm
Width: 8.00 cm
Height: 5.00 cm

Specification

• Universal to most cars.
• 150PSI - 1200PSI pressure range suitable for motorsport use.
• Enhances control under braking, greatly aids turning.
• A must-have tool for All Race Cars, Drifting, Rally and Track Day Cars.
• For professional motorsport.

Features

1、Universal to most cars 2、150PSI - 1200PSI pressure range suitable for motorsport use 3、Enhances control under braking, greatly aids turning 4、A must-have tool for All Race Cars, Drifting, Rally and Track Day Cars 5、For professional motorsport

Package Dimensions:
Length: 11.00 cm
Width: 7.00 cm
Height: 6.00 cm

Condition: 100% Brand New
Item Type: Ignition Coil
Material: Aluminium Alloy+ABS

OEM: 21171‑0743, 21171‑0738, 21171‑0711

Size: Approx. 72x49mm/2.8x1.9in

Fitment:

Fit for Kawasaki Engines FR541V
Fit for Kawasaki Engines FR600V
Fit for Kawasaki Engines FR651V
Fit for Kawasaki Engines FR691V
Fit for Kawasaki Engines FR730V
Fit for Kawasaki Engines FS481V
Fit for Kawasaki Engines FS541V
Fit for Kawasaki Engines FS600V
Fit for Kawasaki Engines FS691V
Fit for Kawasaki Engines FS730V
Fit for Kawasaki Engines FX481 through 921V

Features

1、A direct replacement for the old and broken one. Reference OEM number is 21171‑0743, 21171‑0738, 21171‑0711. 2、This ignition coil designed to fit for Kawasaki FR FS FX Series Engines. 3、Safe aluminium alloy and ABS material, not easy to damage your car and can avoid unnecessary losses. 4、Built to stringent OE specifications by an OE manufacturer and is 100% factory tested. 5、Engineered to provide the same fit and function of the original one on specific vehicle years, makes and models.

Package List

1 x Ignition Coil

Package Dimensions:
Length: 49.00 cm
Width: 15.00 cm
Height: 4.00 cm

Item Type: Rear Side Spoiler
Material: ABS
Color: Carbon Fiber Style
Position: Rear
Fitment: Replacement for X1 E84 2009-2015

Features

1、The rear side spoiler is a perfect replacement for X1 E84 2009‑2015 to better meet your demands. 2、Manufactured by high quality ABS materials, lightweight with stable performance and high reliability. 3、The installation is simple and convenient without any complicated tools or modification for time saving. 4、The rear window splitter could perfect match for the original car, you can directly replace the broken or shabby one. 5、The carbon fiber style is equipped with stylish and exquisite appearance makes your vehicle more beautiful.

Package List

2 x Rear Side Spoiler

Package Dimensions:
Length: 12.00 cm
Width: 8.00 cm
Height: 8.00 cm

Item Type: LED Light Bulbs
Material: Metal + Glass
Working Voltage: 10 to 60V
Power: 20W
Luminous Flux: 2000LM
Current: 1.2A
Protection Level: IP67
Service Life: 50000H
Application: Auto Vehicle Truck Van SUV ATV and Motorcycle

Features

1、Super Bright: P15D LED bulb, 2000LM luminous flux, high brightness, will provide superior illumination and visibility, improving the driving safety. 2、Long Lifespan: Made of aluminum alloy shell, built in powerful fan cools down the heat efficiently, ensures more than 30,000H service time. 3、Waterproof: The headlight bulb adopts IP67 waterproof technology and is fully sealed for safe and stable use in any weather and road conditions. 4、Easy Installation: P15D LED headlight bulb is easy to install, simply plug and play, fit into the factory housing perfectly without any modification. 5、Applications: The working voltage of the LED headlamp bulb is 10 to 60V, suitable for most auto, vehicle, truck, van, SUV, ATV and motorcycle.

Package List

2 x LED Light Bulbs

Package Dimensions:
Length: 15.00 cm
Width: 11.00 cm
Height: 2.00 cm

Features:
1. Made of high quality ABS material, excellent workmanship, good comfort, energy saving, long service life.
2. No lighting delay, no change in the original vehicle function, low power consumption, power and oil saving.
3. High luminous purity, strong penetrating power, directly replace the turn signal lamps of the original vehicle.
4. Exquisite design, unique appearance, a good decoration item for your car as well.
5. Easy to install, suitable for motorcycle with a screw size of 8mm.

Specification:
Condition: 100% Brand New
Material: ABS
Color: Black
Screw Size: 8mm 
Light Color: Yellow Light
Voltage: 12V
Fitment: Suitable for motorcycle with a screw size of 8mm

Package List:
2 x Turn Signal Lamps

Features

1、Made of high quality ABS material, excellent workmanship, good comfort, energy saving, long service life. 2、No lighting delay, no change in the original vehicle function, low power consumption, power and oil saving. 3、High luminous purity, strong penetrating power, directly replace the turn signal lamps of the original vehicle. 4、Exquisite design, unique appearance, a good decoration item for your car as well. 5、Easy to install, suitable for motorcycle with a screw size of 8mm.

Package Dimensions:
Length: 31.00 cm
Width: 28.00 cm
Height: 6.00 cm

Description:

    This is a high quality solo seat baseplate providing as an important part of motorcycle seat support structure. It can protect the motorcycle seat and make the seat can be used for a long time. Made of heavy duty steel, it has a good bearing capacity and very durable. With classic black color, it will perfectly match your motorcycle style. In addition, you can bring it home to replace the old or broken one, and make your motorcycle a new look!

Features:

1. Made of high quality heavy duty steel, good bearing capacity, durable.

2. Solo seat baseplate, provide as an important part of seat support structure, protect the motorcycle seat and make it can be used for a long time.

3. Black color, classic match to your motorcycle.

4. Easy to install with screws, very hot motorcycle part to replace your old or broken seat baseplate.

5. Fit for most of Honda Yamaha Kawasaki Suzuki Sportster Bobber and Chopper Application.

Specifications:

Material: Heavy Duty Steel

Color: Black

Size: 30 x 26cm/11.8'' x 10.2''

Package Weight: Approx. 670g

Fitment: For most of Honda Yamaha Kawasaki Suzuki Sportster Bobber Chopper and Custom Application, Perfect for Sportster XL883/1200

Package Included:

1 x Solo Seat Baseplate

Note:

1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.

2. Easy to install, but professional installation is highly recommended!

Features

1、Solo seat baseplate, provide as an important part of seat support structure, protect the motorcycle seat and make it can be used for a long time 2、Made of high quality heavy duty steel, good bearing capacity, durable 3、Easy to install with screws, very hot motorcycle part to replace your old or broken seat baseplate 4、Black color, classic match to your motorcycle 5、Fit for most of Honda Yamaha Kawasaki Suzuki Sportster Bobber and Chopper Application

Package Dimensions:
Length: 16.00 cm
Width: 12.00 cm
Height: 9.00 cm

Item Type: Carburetor
Material: Aluminium Alloy

Replacement: Direct Replacement

Fitment:

Fit for Polaris Xplorer 250 2000-2002

Fit for Trail Blazer 250 1990-2006

Features

1、Sophisticated craftsmanship, this carburetor is perfect to fit for Polaris Xplorer 250/ Trail Blazer 250 4 Stroke. 2、Can mix fuel and air well, keep the engine running smoothly, and prevent the engine from running out of fuel or overflowing. 3、Made of high qualiy material of aluminium alloy, which makes it durable and have high reliability. 4、It can well replace old parts that are damaged or need to be replaced, and it is easy to install. 5、Engineered to provide the same fit and function of the original one on specific vehicle years, makes and models.

Package List

1 x Carburetor

Package Dimensions:
Length: 10.00 cm
Width: 6.00 cm
Height: 2.00 cm

Features

1、High Strength: This foot side stand is made of aluminum alloy, which is not easy to break, not easy to deform, sturdy and has a long service life. 2、Advantages: The extender stand helps avoid wear marks on the tiles from the motorcycle's side stand and is a great tool for parking on soft outdoor surfaces. 3、Advantages: The face adopts anodic oxidation coloring technology, which effectively improves wear resistance and hardness and protects the metal face. 4、Function: The extender stand provides a larger face area for your original stand to help you park your motorcycle on hot pavement, grass and prevent the stand from sinking into sand, gravel, snow and other soft surfaces. 5、Beautiful Decoration: Provide high fashion decoration style for your motorcycle, change the ordinary design and add unique color to make your motorcycle more beautiful.

Package List

1 x Motorcycle Side Stand Plate Pad

1 x Hexagon Wrench

Package Dimensions:
Length: 24.00 cm
Width: 10.00 cm
Height: 3.00 cm

Item Type: Rear Bumper Spoiler Air Vent Cover

Material: ABS

Fitment:

Replacement for Benz CLS‑Class W218 C218 AMG-Line Facelift 2014-2017

Features

1、Applicable Model: The rear bumper spoiler air vent cover is a replacement for Benz CLS‑Class W218 C218 AMG‑Line Facelift 2014‑2017. 2、Sporty Style: Features a unique appearance design makes it eye catching on the road, sporty lines and details that enhance the sporty and stylish feel of the entire vehicle. 3、Enhanced Stability: Significantly improves the vehicle's aerodynamic performance by promoting better air circulation and reducing airflow resistance. 4、High Performance: Increase the downforce of the vehicle, improve the stability at high speeds, improve the performance of the vehicle, and increase driving pleasure and safety. 5、Duarble Material: The rear bumper air vent spoiler is made of high strength ABS plastic material, which is wear resistant, break and scratch proof, and durable.

Package List

2 x Rear Bumper Spoiler Air Vent Cover

Package Dimensions:
Length: 26.00 cm
Width: 26.00 cm
Height: 8.00 cm

Specification

• Made of high quality material, which is reliable and ensures the maximum durability.
• Comes with fan mounting accessories, easy installation, more convenient.
• This is a good replacement when the original part is damaged.
• Adopted advanced production technology, low consumption and low noise, reliable to use.
• Suitable for universal car, truck, engineering vehicle, van, etc.  

Features

1、Made of high quality material, which is reliable and ensures the maximum durability. 2、Comes with fan mounting accessories, easy installation, more convenient. 3、This is a good replacement when the original part is damaged. 4、Adopted advanced production technology, low consumption and low noise, reliable to use. 5、Suitable for universal car, truck, engineering vehicle, van, etc.